February 26, 2013 /TusMedios/
Lines can be easily cut if storms, construction sites, accidents occur or can even be deliberately altered by potential intruders. The unfortunate result is that you can fall victim to heartless thieves without anything getting in their way.
Witura Corporation is one of Asia's leading manufacturers of innovative GSM telecommunications solutions to meet the present and future needs of individuals and industries. The WT-1010 works hand-in-hand with alarm panel providers worldwide to incorporate a GSM security communicator into any alarm panel. In addition, it provides the ideal solution for commercial, residential, rural security and farm protection applications, where traditional telephone lines are not available for use in the field of security systems.
When your home does not have its phone service available, the WT-1010 ensures that critical alarm information reaches the central surveillance station and, since it uses a GSM communicator, there are no limits on the distance there may be to receive alarm calls or to remotely control the alarm system.
The use of a GSM communicator is absolutely crucial in places such as bank branches, ATMs, jewelry stores, art galleries, warehouses and other points of sale that store valuable objects, where a double protection of the products that are treasured is greatly needed. If the lines have been cut by an intruder or are not working because of any connection problems, the GSM dialer should be smart enough to identify that the line has been cut and send an alarm signal to the police, the homeowner and the central surveillance station.
Most alarm panels on the market use landlines as their primary form of communication to send alarm signals to the police, the homeowner, and the central surveillance station if the alarm is triggered by an intrusion, attempted robbery, or sabotage. However, phone lines can easily break down during storms, when construction is underway, when accidents occur, or can be deliberately modified by potential intruders. Therefore, the reliability of this system is questionable, as has been proven on many occasions in which intruders have ended up with these preventive systems simply by cutting or disconnecting the telephone line before trying to sneak into the houses. By doing that, your alarm system proves completely useless, since it cannot communicate the assault to the central surveillance station. However, with the help of the GSM terminal, which serves as the line's security system, one can still save the situation. The WT-1010 will check the status of the telecommunications line in the alarm system and, in the event that the line is not available, the WT-1010 will transmit the alarm using the GSM to the Alarm Reception Center (ARC) or the Central Surveillance Station (CMS). The GMS WT-1010 marker has built-in alarm signal protocols that have been inserted into the unit and ensures that the entire security protocol can be transmitted to the central surveillance station without any problems. What's more, you can also call and send alert messages to 8 pre-selected phone numbers when the alarm is triggered by intruders. Alarm messages can be edited and programmed up to a length of 50 characters in the desired language. The text displayed can be changed by simply sending an SMS order to the unit. These key advancements provide our customers with enhanced security features that essentially ensure their valuables are safer than ever.
The highly evolved WT-1010 has a very remarkable feature, and that is that it is able to prevent professional thieves from trying to disconnect the GSM using the so-called "GSM Jammers". The WT-1010 will transmit the contact identifier using a telecommunications line if the GSM signal disappears, which immediately raises the alarm. In addition, an auto-scan and restart function allows you to continuously monitor the system status by itself. When there is a problem with the SIM card or if there is a problem with the module, the system will restart automatically. You even have the option to turn on the lights, air conditioning or turn off generators or sensors through the Remote Control Functions from your mobile phone.
Mr. Lee, Witura's Head of Production, says: "The WT-1010 gives customers the opportunity to taste the fruits of our research and development, helping people achieve higher levels of safety in their applications and meeting current and future requirements that our customers may have. This development will increase demand, just as it has already done successfully in our other products.
Not only does this device offer a wide range of standout features, but it also comes with a backup rechargeable battery to prevent power failures or potential power outages that make intruders possible. GSM will continue to function normally even when there is no electricity. The LCD screen will check the strength of the GSM signal and the battery capacity. Moreover, its low power consumption means that it only uses 30mA when it is at rest and 260mA when it transmits the alarm. The "Self-Examination Response System" function ensures that the GSM "is alive" and working as it should. The WT-1010 is designed in such a way that it can be installed inside the alarm panel or inside its own wall box.
Our marketing and sales team, along with our research and production groups in both China and Malaysia, are committed to providing exceptional products and services to help customers apply new materials and technologies like these." Easy-to-use, practical and cost-effective solutions are the key to all our designs and new products.
Read more about us and discover the magnificent range of products we have. For more information, please visit us at www.witura.com.
Those who are interested in contacting Witura and who want to learn more about the GSM Support Alarm Marker can also send an email to [email protected].
Established in 2003, Witura Corporation is recognized as a large private company involved in the design, manufacture and supply of GSM terminals and GMS and GPRS modems for the burglar alarm industry. We design GSM intercoms and 3G cameras for access control, automatic door activation and the closed circuit television market and producing GSM controllers for telemetry and remote surveillance, and for remote control and data recording systems. We are also linked to the telecommunications industry to provide GSM portals for call termination and fixed mobile terminals (FWT), for fixed wireless telephones (FWP) and for the wireless local circuit (WLL) market.
FG_AUTHORS: YourMedia: Free Press Releases, Publish Press Releases and Releases
